Home > Gasket Maker >

DY-M587 SILICONE GASKET MAKER (NEUTRAL)

Product Categories

Hunan Baxiongdi New Material Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

DY-M587 SILICONE GASKET MAKER (NEUTRAL)

Initial Cure Time : 10-20 minutes

Package : 85g/tube; 12tubes/small box;144tubes/big box

Size : 44x44x38 (cm)

Shelf Life : 12 months

Contact Now

1. Properties & Applications

High temperature silicone sealant is developed by advanced technique. It is of one component, good sealing, resistance to high temperature and oil, weatherability, no flowing with vertical operation, no corrosion, low odor. It can replace a variety of rubber pads, asbestos mat, cork pad and paper pad to prevent leakage of water, oil, gas.
High temperature silicone sealant is applicable to automobiles, motorcycles, marine engines, gear boxes, fuel tank, construction machinery, chemical equipment, pipeline pumps, instrumentation, electronics industry, electrical devices, and also to flat flanges, pipe joints, sealing cover joints in other mechanical equipment.

2. Directions

Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
Pierce the nozzle with the cap. Coat the gasket from the outer edge to inner edge at about 1.6 -3.2 mm thickness.
The surface of adhesive film will create reaction in about 10-20 minutes. Then press and tighten the two sealing sides.
It’ll take 24 hours to reach its maximum strength at room temperature 25â.
Re-cap the tube after use. Wash your hands with water, and clean tools.

3. Storage & Warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing placesã
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

In the event of mass use, make a pre-test.
The adhesive is irritable to skin and eyes.
Wear gloves while applying glue.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

4. Parameters

Color	Elongation (%)	Filling Gap	Heat Resistance
Blue paste	300	6mm	-60âï½+320â
Touch dry	Full cure	Shelf lifeï¹25âï¹	Compressive Resistance
15minsï½20mins	24hrs	12 months	10MPa

DY-M587 SILICONE GASKET MAKER (NEUTRAL) ãã

Product Tags:

NEUTRAL SILICONE GASKET MAKER

Wholesale DY-M587 SILICONE GASKET MAKER (NEUTRAL) from china suppliers

DY-M587 SILICONE GASKET MAKER (NEUTRAL) Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hunan Baxiongdi New Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!